Mounting In Housing Fdch221 - Siemens FDCI221 Technical Manual

5.2 Mounting in housing FDCH221

Building Technologies
Fire Safety
The module can be installed at any location, along with the separate FDCH221
housing.
When installing the module in the housing FDCH221, proceed as follows:
1. Open the housing.
2. Break out the required cable entries.
3. Install the housing on a flat surface.
4. Insert cables. If necessary, fix the cables using M20 x 1.5 metal cable glands
(accessories) or use a different cable entry.
5. If you are using shielded cable, join the shielding to the DBZ1190-AB
connection terminal. The shielding must not touch any extrinsic ground
potentials or metal parts in the housing.
6. Install the module in the housing using the M3 x 12 fixing screws supplied.
7. Connect the cables to the corresponding terminals.
8. Close housing using supplied screws.
Figure 18: Installing the module in the FDCH221 housing
See also
2 Dimensions [
2 Connecting the module [
Mounting / Installation
Mounting in housing FDCH221
45]
40]
5
39 | 50
A6V10211122_m_en_--
2018-09-18