Printed Circuit Board View Of The Input/Output Module - Siemens FDCI221 Technical Manual

3.3.4 Printed circuit board view of the input/output module

IN 1
2
IN 1
LINE -
LINE -
1
LINE +
Building Technologies
Fire Safety
Figure 7: Printed circuit board view of the input/output module
1 Detector line connections
2 Connections for input IN1
3
Red LED for input status and
localization mode
Red LED for output status
Assignment of terminals for output OUT A, depending on jumper
position
Jumper position Configuration of the output
J2 Bistable, switched voltage, normal operation
(option of monitoring output lines)
Bistable, switched voltage, inverted operation
(output lines not monitored)
J1 Bistable, potential-free contact (output not monitored)
Structure and function
3
1 2
4
J2 1
2
J1
3
4
4 Jumper J1/J2 for output
configuration
5 Terminals for output OUT A
3
Setup
5
21 | 50
A6V10211122_m_en_--
2018-09-18