Output (For Input/Output Module Only) - Siemens FDCI221 Technical Manual

3.4.3 Output (for input/output module only)

Building Technologies
Fire Safety
Input module FDCI221 and input/output module FDCIO221
FDCI221
FDCIO221
Figure 9: Connection diagram of input with monitoring for open line
FDCI221
FDCIO221
Figure 10: Connection diagram of input with monitoring for open line and short circuit
With the exception of the jumper, the output must be configured from the control
panel. To ensure the desired function, the jumper must be plugged locally into the
relevant position on the module.
If the configurations on the control panel and jumper don't match, this is recognized
and an error message is triggered.
The output must be potential-free.
3.3 k
680 3.3 k
Structure and function
Function
25 | 50
A6V10211122_m_en_--
2018-09-18
3