Care And Cleaning; Removable Limescale Filter; Cleaning The Kettle - Gastroback Design Kettle Advanced Operating Instructions Manual

damage. In this case, take your kettle to an authorised service centre for inspec-
tion and repair.
Do not attempt to operate the appliance after shutdown by the ther-
WARNING:
mal cut out. Any maintenance, repair and operation other than described in these
instructions must be performed at an authorised service centre to avoid risk of electric
shock, fire or injuries to persons.

CARE AND CLEANING

Always switch off, unplug and let the appliance cool down before
WARNING!
removing the mesh filter, moving the power base or cleaning the appliance.
CAUTION! To avoid damage, do not use any chemicals, disinfectants, steel wool,
abrasive cleaners or hard or sharp utensils to clean the appliance. Handle with care.
Do not place or immerse the kettle base, power base or power cord in any liquids.
Do not spill any liquids on the kettle base, switch area, power base or power cord.
Do not place the kettle or power base in an automatic dishwasher.

REMOVABLE LIMESCALE FILTER

The Design Kettle Advanced features a removable limescale filter to filter out sca-
le deposits for clearer water. Additionally the filter will prevent boiling water from
splashing, when you pour the water. Clean the filter regularly to avoid blockage of
the mesh.
CAUTION: Handle the limescale filter with care. Do not scratch, scrub or scrape on
the filter mesh with hard or sharp utensils to avoid damage.
1. Switch off and unplug the appliance and allow to cool down. Press the opening
button to open the lid. Grasp the grey bar of the limescale filter and lift it up and
out of the kettle.
2. Clean the limescale filter. Rinse the filter under running water. Possibly use a pla-
stic cleaning brush or sponge. If the limescale filter is blocked with lime: leave
the filter overnight in warm vinegar. Carefully rinse with clear tap water.
3. To replace the filter, simply slide the filter in the correct orientation down into the
slots behind the spout of the kettle (see ›Features of Your Design Kettle Advan-
ced‹). Push the filter down, until the grey bar is in line with the brim of the kettle
and the lid of the kettle can be shut tightly.

CLEANING THE KETTLE

In normal case there is no need to clean the interior of the kettle. Before first use or
after a longer period of storage rinse the interior of the kettle with clear drinking
27