Before First Use; Operating Your Design Kettle Advanced - Gastroback Design Kettle Advanced Operating Instructions Manual

BEFORE FIRST USE

Unpack the appliance carefully and remove any promotional material attached to
the kettle, but do not remove the warning or model labels on the appliance. Before
first use, fill the kettle to its maximum level (1700/MAX), boil and discard the water.
The lid opens automatically just by pressing the opening button. Ensu-
CAUTION:
re that there are no objects in the interior of the kettle. Do not immerse the kettle
base, switch area, power base or power cord in water, or allow moisture to come
in contact with these parts.
1. To fill the kettle, remove it from the power base and open the lid by pressing the
opening button.
2. Fill in pure tap water (drinking quality) up to the water level mark 1700/Max.
Try to hold the kettle as level as possible, while doing so.
Boil the water as described in the following section (Operating Your Design Kettle).
3. Discard the water.
Note:
Your kettle will only operate when positioned on the power base with the power
switch in the on position. The kettle will automatically switch off, once the water
has boiled. Too little water will result in the kettle switching off before the water
has boiled.

OPERATING YOUR DESIGN KETTLE ADVANCED

Only fill with pure drinking water. Do not fill any other liquids or food-
CAUTION!
stuffs into the water container and do not add any additional ingredients, such as
spices or flavours. Do not place any foreign objects in the water container. Do not
drip or spill any liquids on the exterior of the kettle or on the power base.
Ensure the kettle is filled with the appropriate amount of water (water level between
500 and 1700/MAX) before switching on the appliance.
WARNING! Do not use any extension cord or multi socket outlet to avoid risk of
fire and electric shock. Always connect the appliance directly to a separately pro-
tected mains power supply wall socket with protective conductor (earth/ground) con-
nected properly (see Important Safeguards for Electrical Appliances). Always com-
pletely unwind the power cord before connecting the plug to the power supply.
Do not use any mains adapter other than the supplied power base for the kettle.
Always place the appliance on a stable, level, dry and sufficiently large surface.
Ensure, that the power base will not tilt or wobble during operation. Do not operate
the appliance on an inclined surface, to avoid scalding and damage by boiling
water overflowing the brim of the kettle.
24