Maintenance; Maintenance - Fault Messages - Wolf FGB-K Series Installation And Maintenance Instructions For Contractors

Safety information for

maintenance

Fault history
1
2
Reset button (4)
Operating mode
button (5)
Info button (3)
62
28.1. Maintenance – Fault messages
For maintenance, observe the safety instructions from page 4.
Any faults that have occurred during operation can be called up on the contrac-
tor level under "Fault history".
To do this, press and hold reset (4) for 10 seconds (until ts appears).
Using keys (1) and (2), access the fault history menu "Hi" and select with reset
(4).
7 The most recent faults are shown, providing maintenance information for the
heating contractor.
Fault history
- Press button (1) to select H01 to H08.
- Press button (7) to display the fault code.
To return to the contractor level, press reset button (4) twice. Here, use but-
tons (1) and (2) to select the fault history menu "rES" in order to reset the fault.
To reset the fault history:
- When "rES" is displayed, press and hold operating mode button (5)
for 10 s.
Press and hold info button (3) for 1 s to exit the contractor level.
3064458_201811