Wolf FGB-K Series Installation And Maintenance Instructions For Contractors page 32

Emissions test mode
1
2
Reset key (4)
32
15. Control unit
Emissions test mode is activated by simultaneously pressing and holding
keys (6) and (7) for 5 s.
This mode will now run for up to 15 min,
i.e. it is automatically terminated after this time has elapsed.
It can be terminated sooner by pressing key (4).
The heating appliance starts and initially switches to upper load.
7
Enabling emissions test mode
6
Emissions test upper load
1
Emissions test lower load
(for adjusting the CO
2
Disabling emissions test mode
)
2
4
7
(5 seconds)
6
Display subject to
appliance version
3064458_201811