Standard Equipment And Specifications - Tiger JD 5065 / 5085 - 5105M Mounting And Operating Instructions

1. STANDARD EQUIPMENT AND SPECIFICATIONS

SIDE ROTARY
Cutting Width
Spindle Drive
Cutter Assembly
Cutter Head Arc
Knives
Main Frame
Lift Control
* May vary depending on tractor model.
The Mower is designed for certain mowing applications and is rated to cut up to a specific
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower's rated capacity or to cut any type of non-
vegetative material. Only operate this Mower on a properly sized and equipped Tractor.
Operating this Mower in an application for which it is not designed and/or operating the
Mower with the wrong size Tractor can cause Mower component damage and equipment
failure resulting in possible serious injury or death.
SIDE ROTARY
© 2011 Alamo Group Inc.
OPERATION
60" and 72" Actual Cut
Direct Spline and Direct Flexible Coupler
One-piece formed dish type with one-piece forged spindle assembly
180° on Cable Lift and 159° on Combo Draft Beam
Two full swinging high suction heat treated knives standard
Optional three, four or six knives available
*Solid mount design may include front, mid and rear braces
(May vary depending on tractor model)
Tractor Hydraulic or Optional Cable control and valves
Operation Section 3-3
(SGM-14)