Tiger JD 5065 / 5085 - 5105M Mounting And Operating Instructions page 67

Periodically inspect all moving parts for wear and replace when
necessary with authorized service parts. Look for loose fasteners, worn
or broken parts, and leaky or loose fittings. Make sure all pins have
attaching hardware. Serious injury may occur from not maintaining this
machine in good working order.
The operator's manual and safety signs affixed on
the unit contain important instructions on the safe
and proper use of the equipment. Maintain these
important safety features on the implement in good
condition to ensure the information is available to
the operator at all times.
• Ensure all safety signs are in place and legible.
Replace missing, damaged, and illegible
decals. OPS-U- 0011_A
NOTE: The mower Operator's Manual and affixed Decals contain important instructions on the safe and proper
use of the mower. Maintain these important safety features on the mower in good condition to ensure the
information is available to the operator at all times.
FRAME ASSEMBLY
• Inspect condition of mounting frame weldment.
• Inspect condition of frame Assembly.
• Ensure all bolts and screws are in position and
are properly torqued.
• Ensure all pins are in place and fastened with
screws.
• Ensure frame is properly mounted to tractor
and hardware is
tightened. OPS-R-0099
SIDE ROTARY
© 2011 Alamo Group Inc.
OPERATION
propely installed and
Operation Section 3-11
(SG-21_A)