Chapter 1 Installing Operating System
2.3.5
Updating packages
Follow the steps below to update packages.
1.
Store the package you have downloaded from Red Hat Network in the desired directory, and go to
that directory.
2.
Run the following command to update packages.
# rpm -Uvh --oldpackage nfs-utils-1.3.0-0.8.el7.x86_64.rpm
3.
Run the following command to update packages.
# rpm -Uvh samba-* lib* pytalloc-2.1.5-1.el7_2.x86_64.rpm
4.
Run the following command to update packages.
# rpm -Uvh glibc-*
# rpm -Uvh dracut-*
# rpm -Uvh openssl-*
# rpm -Uvh kernel-doc-3.10.0-327.18.2.el7.noarch.rpm
# rpm -Uvh kernel-devel-3.10.0-327.18.2.el7.x86_64.rpm
# rpm -Uvh kernel-3.10.0-327.18.2.el7.x86_64.rpm
5.
Run the following command to reboot the system.
# systemctl reboot
If nfs-utils included in the RHEL7.2 installation media is not installed due to customization
Tips
by a customer, it is not required to apply this file.
If Samba included in the RHEL7.2 installation media is not installed due to customization
Tips
by a customer, it is not required to apply this file.
Express5800/R320e-E4, R320e-M4 Installation Guide (Linux)
2. Setting up
33