Glossary - NEC Express Server Express5800 Series Installation Manual

Glossary

Terms
BIOS Setup Utility (SETUP)
BMC
BMC Configuration Utility
CPU module
CPU/IO module
DUMP Switch
EXPRESSBUILDER
EXPRESSSCOPE ENGINE 3
Express Report Service
Express Report Service (HTTPS)
ExpressUpdate
ExpressUpdate Agent
Flash FDD
NEC ESMPRO
NEC ESMPRO Agent
NEC ESMPRO Agent Extension
NEC ESMPRO Manager
OS standard installer
Offline tools
PC for Management
PCI module
Product Info Collection Utility
Windows OS parameter file
64
Software for setting BIOS. You can run this software by pressing <F2> key during POST.
Baseboard Management Controller (BMC) is a built-in controller that supports the IPMI
version 2.0 protocol. BMC can manage the server hardware.
Software for setting BIOS or BMC. You can use as Windows application or run this
software when pressing <F4> key during POST.
A CPU subsystem logically configured in a CPU/IO module. It includes CPUs and
memory.
A module that includes CPUs (processors), memory, PCI boards, a cooling fan, hard disk
drives and power supply units.
A switch that is used for collecting the memory dump if an error occurs. You can specify
the destination of the dump by using the OS function.
Standard software with a feature that makes it easier to install Windows OS in Windows
model. This also includes several useful applications and instruction manuals. (When
installing OS other than Windows in ft server, the feature that helps easy OS installation is
not available.)
A name of BMC for NEC Express5800 series.
Software that can report the server failure to the contact center by E-mail or modem. This
software is installed with NEC ESMPRO Agent to the server.
Software that can report the server failure to the contact center by HTTPS.
A feature for updating BIOS, firmware, driver, or software of the server. This feature is
available when NEC ESMPRO Manager cooperates with EXPRESSSCOPE ENGINE 3
and ExpressUpdate Agent.
Software for performing ExpressUpdate. This is installed to the server.
An optional USB device that can use as a floppy disk drive.
Standard software for the server management. This consists of several applications for
managing or monitoring.
Software for monitoring the server. This works with NEC ESMPRO Manager and resides
as the OS service.
Software for performing the scheduled operations. This works with NEC ESMPRO
Manager.
Software for managing plural servers on network.
An installer that stored in Windows installation disc. Use this installer if you want to install
the OS manually.
Software that can confirm or change IPMI data such as SEL, SDR, or FRU. You can start
Offline tools when pressing <F4> key during POST.
A computer for managing the server on network. A general Windows/Linux computer can
be used as "PC for Management".
An I/O subsystem logically configured in a CPU/IO module. It includes hard disk drives,
PCI cards, BMC and 1G/10G LAN.
Software for collecting several hardware/software statuses or event logs. You can easily
collect the data for the server maintenance by using this software.
A file that saved settings for installing Windows. You can install with the saved settings in
this file when setting Windows with EXPRESSBUILDER.
Express5800/R320e-E4, R320e-M4 Installation Guide (Linux)
Description
Glossary