Chapter 1 Installing Operating System
8. Click [INSTALLATION DESTINATION].
9. Select 2 units of the devices at the installation destination from the local standard disk, select [[I will configure
partitioning], and click [Done].
Tips
The required package for the ft control software is automatically installed. See Chapter
1 (2.3.3 Installing the required package) of this manual.
Select [Server with GUI] for "Base Environment" to use the graphical target (graphical
login mode).
For the specified base environment or packages included in add-on, check the
"repodata/*-comps-Server.x86_64.xml" file of the installation media. This file describes
the available environment (<environment> tag) and add-on (<group> tag) in the XML
format.
The installation media includes the package group and package that cannot be
installed from the Red Hat installation program selection screen. For the package group
and how to add the package, see Chapter 1 (3.1 Adding the Package Group and
Package) of this manual.
If [Minimal Install] is selected, the required hard disk drive capacity is 5 GB. I all the
selectable add-ons are selected, the capacity is 10 GB.
Express5800/R320e-E4, R320e-M4 Installation Guide (Linux)
2. Setting up
23