Installing Nec Esmpro Agent - NEC Express Server Express5800 Series Installation Manual

Chapter 1 Installing Operating System
2.3.8

Installing NEC ESMPRO Agent

Follow the steps below to install NEC ESMPRO Agent.
1. Login the system with root user.
2. Insert the ft Server Control Software Install CD into optical disk drive of the server, and mount it by
running the following command.
# mount /dev/cdrom /mnt
3. Move to the directory where NEC ESMPRO Agent is stored, and execute install script.
# cd /mnt/esmpro_sa/
# sh ./pp_install -s OFF -l en_US.UTF-8
4. Remove the ft Server Control Software Install CD from optical disk drive of the server.
# cd / ; eject /mnt
If eject command fails to eject CD, unmount it, and remove the ft Server Control Software Install CD from
optical disk drive manually.
5. Restart the system.
# systemctl reboot
36
"/mnt" indicates the mounting destination of the optical disk drive. The optical disk drive
Tips
may be mounted automatically to the destinations other than "/mnt". In this case, execute
the following command, and unmount the drive temporarily or replace the mounting
destination as required.
# umount /dev/cdrom
Express5800/R320e-E4, R320e-M4 Installation Guide (Linux)
2. Setting up