Network Setting; Overview Of Network Setting - NEC Express Server Express5800 Series Installation Manual

Chapter 1 Installing Operating System
2.5

Network Setting

Network setting is described here.
2.5.1

Overview of network setting

The network duplexing is configured as a pair of the CPU/IO module 0 and CPU/IO module 1 and the network
interface of the PCI slot corresponding to each module. The network interface is named according to the naming
rule described below.
PCI slot
1G LAN connector
10G LAN
connector
PCI slot 1
PCI slot 2
PCI slot 3*
PCI slot 4*
* For R320e-E4, 10G LAN connector, PCI slot 3, and PCI slot 4 do not exist.
40
Important Be sure to use the vndctl command if setting the IP address, subnet mask, and
default gateway. For details, see Chapter 2 (2. Network Duplexing) in "Maintenance
Guide".
PCI slot and network interface name
Port CPU/IO module 0
#1 eth100600
#2 eth100601
#1 eth101200
#2 eth101201
#1 eth100100
#2 eth100101
#1 eth100200
#2 eth100201
#1 eth100300
#2 eth100301
#1 eth100400
#2 eth100401
Express5800/R320e-E4, R320e-M4 Installation Guide (Linux)
CPU/IO module 1 Slot number of the vndctl
eth110600
eth110601
eth111200
eth111201
eth110100
eth110101
eth110200
eth110201
eth110300
eth110301
eth110400
eth110401
2. Setting up
command
1
2
3
4
5
6
7
8
9
10
11
12