Before Installing Nec Esmpro Agent - NEC Express Server Express5800 Series Installation Manual

Chapter 1 Installing Operating System
2.3.7

Before installing NEC ESMPRO Agent

Take the steps below before starting installation of NEC ESMPRO Agent.
1. Login the system with root user.
2. When monitoring the server using NEC ESMPRO Agent from NEC ESMPRO Manager, use SNMP.
To perform remote shutdown, local polling, and to change threshold from NEC ESMPRO Manager,
modify the SNMP environment file (/etc/snmp/snmpd.conf) to set a community privilege to "read
write" for ESMPRO MIB, and restart snmpd. If these features are not used, the community privilege
can be "read".
When NEC ESMPRO Agent is installed by using rpm command, it adds the following information to
snmpd.conf to cope with SNMP request from ESMPRO MIB and Ethernet Like MIB.
dlmod ntpass /opt/nec/esmpro_sa/lib/ntpass.so
ntpass .1.3.6.1.4.1.119.2.2.4.4
ntpass .1.3.6.1.2.1.10.7
In the following example, "read write" privilege is given to every MIB(.1) in default community (public).
####
# First, map the community name "public" into a "security name"
#
com2sec notConfigUser default
####
# Second, map the security name into a group name:
#
group
group
####
# Third, create a view for us to let the group have rights to:
#
#view
#view
view
####
# Finally, grant the group read-only access to the systemview view.
#
#access notConfigGroup ""
access notConfigGroup ""
For detailed information, refer to help of snmpd.conf.
Use man command to open snmpd.conf file.
# man snmpd.conf
sec.name source community
groupName securityModel securityName
notConfigGroup v1 notConfigUser
notConfigGroup v2c
name incl/excl
systemview included .1.3.6.1.2.1.1
systemview included .1.3.6.1.2.1.25.1.1
all included
group context sec.model sec.level prefix read
any
any
Express5800/R320e-E4, R320e-M4 Installation Guide (Linux)
(ESMPRO MIB)
(Ethernet Like MIB)
public
notConfigUser
subtree mask(optional)
.1 80
write notif
noauth exact systemview none none
noauth exact all all none
2. Setting up
35