3.1.2.4
Installing a strain relief
Requirements
For mounting of the strain relief plate you need:
● The built-in device
● The strain relief plate from the scope of delivery
● Three M3 screws from the scope of delivery
● A torque screwdriver with T10 insert
Procedure
Fasten the strain relief plate using the three M3 screws with a T10 screwdriver, torque
0.8 Nm.
The figure below shows an example.
IFP V2, IFP V2 PRO
Operating Instructions, 08/2019, A5E46641410-AA
Installing and connecting the device
3.1 Preparing for installation
41