Installing And Connecting The Display Unit; Preparing For Mounting; Checking The Package Contents - Siemens SIMATIC HMI IRD400 Operating Instructions Manual

Installing and connecting the display unit

3.1

Preparing for mounting

3.1.1

Checking the package contents

Check the package content for visible signs of transport damage and for completeness.
Note
Damaged parts
Do not install parts damaged during shipment. In the case of damaged parts, contact your
Siemens representative.
The package content is described in section Scope of delivery (Page 7).
Keep the provided documentation in a safe place. The documentation is part of the HMI
device and is required for subsequent commissioning.
IRD400
Operating Instructions, 05/2018, A5E36790512-AC
3
13