Preface - Siemens SIMATIC HMI Series Operating Instructions Manual

Preface

These operating instructions contain all the information you need for commissioning and
using the Industrial Flat Panel SIMATIC IFP V2 and the Transceiver Unit.
These operating instructions are intended both for programming and testing personnel who
commission the devices and connect them to other units (automation systems, programming
devices), and for service and maintenance technicians who carry out maintenance work or
fault analyses.
Basic knowledge required
A solid background in personal computers and Microsoft operating systems is required to
understand this manual. General knowledge in the field automation control engineering is
recommended.
Scope of the operating instructions
These operating instructions apply to the following SIMATIC IFP V2 devices with article
numbers 6AV7863-.....-2...:
● SIMATIC IFP1500 V2, IFP1900 V2, IFP2200 V2, IFP2400 V2
● SIMATIC IFP1500 V2 extended, IFP1900 V2 extended, IFP2200 V2 extended,
IFP2400 V2 extended
● SIMATIC IFP1500 V2 PRO, IFP1900 V2 PRO, IFP2200 V2 PRO
These operating instructions for the Transceiver Unit with the article number
6AV7860-3EH00-0AA0 also apply.
Scope of this documentation
With the SIMATIC IFP V2 you receive the following documents:
● In printed form: Quick Install Guide for installation and commissioning
● Electronically as PDF file on the "Documentation and Drivers" CD/DVD:
– "IFP V2, IFP V2 PRO" operating instructions
– "Panel Drivers and Tools PDT" operating manual
With the Transceiver Unit you receive a Quick Install Guide in printed form.
IFP V2, IFP V2 PRO
Operating Instructions, 08/2019, A5E46641410-AA
You can find the Operating Manual in the PDT installation directory after PDT has
been installed.
3