General Installation; Removing The Packaging And Checking Individual Parts; Installing The Lcd Monitor - Siemens SCD 1898-I Instruction Manual

Instruction manual
3

General Installation

Preparation for installing the LCD monitor include the following points:
1. Removal of all packaging,
2. Checking of components for damage,
3. Comparison of components received with those on the delivery note,
4. Connection to the computer system and power supply,
5. Building into your system, bearing in mind technical and ergonomic aspects.
3.1

Removing the Packaging and Checking Individual Parts

Notice
If any deficiencies are found then please contact the service department given on
the delivery note. Have the delivery note number, serial number and a description
of the deficiency to hand.
• After unpacking all the delivered components, they should be checked for
completeness and for possible transport damage (visual inspection).
The original packaging should be kept for future transportation.
3.2

Installing the LCD Monitor

Thermal Problems
Caution
Please bear in mind that increased temperatures can lead to defects and to a
significant reduction in the lifetime of the monitor.
In order that the LCD monitor maintains an optimum operating temperature while in
use, air must be allowed to circulate freely around the SCD 1898 I/IT LCD monitor
enclosure. It is particularly important that the rear of the system is kept free.
EMC Problems
This LCD monitor is a piece of equipment designed for building into an industrial
system. The operator of the entire plant is responsible for maintaining
electromagnetic compatibility according to EMC laws.
Safety Problems
All voltage and signal connections must adhere to appropriate legal requirements.
Ergonomics
The screen should be easily viewable from all sides and without reflections.
24
High-Resolution 18" LCD Monitors SCD 1898-I/IT
01.02
A5E00120696