Installing your Text Display (TD) Device
2.1
Overview
Installing your TD Device
You can install your TD device for easy access, whether on a panel or on a door of an
enclosure.
Installed properly, the TD devices meet the following standards (as noted) for protection.
● IP 65 (mounted on front of the panel)
● IP 20 (mounted on casing)
● UL 50 Type 4X
Refer to Appendix A for technical specification and for information about agency approvals
and other certifications.
Tip
You can use the TD 200, version 3.0 and the TD 200C, version 1.0 with an existing TD 200
configuration without having to modify the control program in the S7-200 CPU. The TD 100C
and the TD400C are not compatible with the TD 200 devices, nor with each other.
2.2
Components Shipped with the TD Devices
Components Shipped with the TD Devices
The TD devices ship with the following components:
● Gasket: Protective cushion with gasket for installing the TD device in inclement
● TD/CPU cable: 9-pin, straight-through cable that provides both communication and power
● Spacers: Self-adhesive spacers for mounting the TD device in a panel (TD 200,
● Mounting brackets: Brackets for mounting the TD device in a panel (TD 100C only)
● Power connector: The TD 200, TD 200C, and the TD400C ship with a connector to power
The TD 200 ships with a pull-out user label that allows you to label the function keys for your
application.
Text Display (TD) User Manual
System Manual, 08/2008, A5E00765548-03
environments
to the TD device. The TD 200, TD 200C, and TD400C ship with a TD/CPU cable. The
TD 100C does not include a TD/CPU cable; it must be ordered separately. The order
number for the TD/CPU cable is 6ES7-901-3EB10-0XA0.
TD 200C, and TD400C only)
the TD device from an external supply.
2
31