Commissioning The Ifp - Siemens SIMATIC HMI Series Operating Instructions Manual

Commissioning the IFP

When you operate the IFP exclusively as monitor and do not change the brightness, you do
not need to commission the device. To use extended functions, perform the following
commissioning.
Requirement
● The IFP is mounted according to the documentation.
● The IFP is connected according to the documentation and connected to a PC for
commissioning.
● DVD "Documentation and Drivers" or USB stick with a copy of the DVD
Procedure
1. Switch on the PC.
2. Switch on the power supply of the IFP.
3. Insert the "Documentation and Drivers" DVD into the CD/DVD drive of the PC.
Alternative: Insert the USB stick with the copy of the DVD into a USB port on the PC.
4. Follow the instructions for installation.
IFP V2, IFP V2 PRO
Operating Instructions, 08/2019, A5E46641410-AA
4
75