Installing A Micro Sd Card - H3C MSR830 Series Installation Manual

Remove the nut from the grounding post of the grounding point on the rack.
4.
Use the needle-nose pliers to bend a hook at the other end of the grounding cable, and use the
5.
removed nut to attach the hook to the grounding post.
Figure 10 Grounding the router through the rack

Installing a Micro SD card

CAUTION:
To avoid damaging the Micro SD card slot, do not use excessive force when you install a Micro SD
card.
Only the MSR830-6HI-GL and MSR830-10HI-GL routers support Micro SD cards.
To install a Micro SD card:
Remove the screw on cover over the Micro SD card slot and remove the cover.
1.
Insert the Micro SD card into the slot along the slide rails.
2.
If you encounter any resistance, re-orient the card and try to insert it again.
Reinstall the cover and fasten the screw on the cover.
3.
12