Verifying The Installation; Accessing The Router For The First Time - H3C MSR830 Series Installation Manual

Verifying the installation

After you complete the installation, verify the following information:
•
There is enough space for heat dissipation around the router, and the rack or workbench is
stable.
•
The USB device, if any, is correctly installed.
•
The router and the power source are correctly grounded.
•
The correct power source is used.
•
The router is connected correctly to the console terminal and other devices.

Accessing the router for the first time

WARNING!
Before powering on the router, locate the switch for the power source so that you can cut off power
promptly in case of an emergency.
For a router starting with empty configuration, you must press Ctrl+D to access the CLI.
To access the router for the first time:
Verify that the installation and configuration environment is as described in
1.
installation."
Power on the router.
2.
During the booting process, verify the following items:
3.
The system LED (SYS) on the front panel is flashing green at 1 Hz. For more information
about LEDs, see
The configuration terminal displays information correctly.
The router first initializes its memory at startup and then runs BootWare.
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extended BootWare
****************************************************************************
*
*
*
****************************************************************************
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd.
Compiled Date
CPU ID
CPU L1 Cache
CPU L2 Cache
Memory Type
Memory Size
Flash Size
"Appendix B LEDs."
H3C MSR830 BootWare, Version 1.12
: Jun 20 2017
: 0xc
: 32KB
: 1024KB
: DDR3 SDRAM
: 1024MB
: 256MB
17
"Verifying the
*
*
*