Bartscher 900T2 Series Manual page 4


Do not use any accessory or spare parts that have not been
recommended by the manufacturer. These can be dangerous for the
user or lead to damages of the device or personal injury, and further,
the warranty expires.

To prevent hazards and to ensure optimum efficiency, no modifications
or alterations to the device that are not explicitly approved by the
manufacturer may be undertaken.

Never allow the power cable to come into contact with heat sources or
sharp edges. The power cable should not hang over the side of the
working surface. Ensure that no one can step on or trip over the cable.

The power cable must not be folded, bent or tangled, and must always
remain fully unrolled.

Never place the device or other objects on the power cable.

Do not lay the cable over carpets or heat insulations. Do not cover the
cable. Keep away the cable from operating range and do not dunk it
into water.

Inspect the power cable regularly for damage. Never use the device if
the cable is damaged. If the power cable is damaged, have an
authorised service center or qualified electrician replace it.

The device is not adapted for use with an external timer or remote
control.

Never leave the device unattended when in use.

Do not move or tilt the device when in operation.

Only use the device indoors.
- 25 -