Read these instructions before using and keep them available at all times! This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device.
CAUTION! This symbol highlights dangerous situations which could lead to light injuries, or damage, malfunction, and/or destruction of the device. NOTE! This symbol highlights recommendations and information aimed for effective and trouble-free device operation. 1.2 Safety instructions The device can be used by children 8 years and up, as well as by people with disabilities and those with limited experience/ knowledge as long as they are under supervision or have been instructed on proper use of the device and its possible dangers.
Page 5
Prevent access of children to the package materials like plastic bags and foamed polystyrene elements. Suffocation hazard! Only a qualified technician and using original spare parts and accessories should carry out repairs and maintenance of the device. Do not attempt to repair the device yourself. ...
Page 6
Check the power cord regularly for damage. Do not use the device if the power cord is damaged. If this cable is damaged, it must be replaced by customer service or a qualified electrician in order to avoid dangers. ...
All technical activities like installation and maintenance must be performed by the qualified service personnel only. The device is not intended for outdoor use and may only be used indoors. The refrigerator „Mini“ is intended for cooling and maintaining the temperature of warm beverages and food products. CAUTION! Any use going beyond the intended purpose and/or any different use of the device is forbidden and is not considered as conventional.
2. General information 2.1 Liability and Warrantees All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors.
3. Transport, packaging and storage 3.1 Delivery check Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints.
4. Technical data 4.1 Overview of parts ① ⑪ ON/OFF switch Door ② ⑫ Digital display Door lock ③ ⑬ Lighting button Handle ④ ⑭ Reduce value button External ventilator (air outlet) ⑤ ⑮ Increase value button External ventilator (air outlet) ⑥...
DC cable Insert the Connect the DC plug to a DC pin into the DC terminal cigarette lighter (12 V) at the rear of the device 4.2 Technical specification Refrigerator „Mini“ Name 700089 Code no.: External construction: plastic Cooling capacity: 15 °C to 18 °C below ambient temperature...
5. Installation and operation 5.1 Positioning and connection Positioning Before the operation unpack the device and remove all package material. CAUTION! Never remove the rating plate and any warning signs from the device. Locate the device in a safe place that can support its weight. ...
Page 13
Connection DANGER! Electric shock hazard! The device can cause injuries due to improper installation! Before installation and connecting the local power grid specification should be compared with that of the device (see rating plate). Connect the device only in case of compliance! Observe the following instructions when connecting the device, otherwise a risk of electric shock will result.
5.2 Operation For sanitary reasons, before activation ensure to thoroughly wash the device on the inside and outside with a wet cloth, then dry. The device’s properties The fridge is intended for cooling and maintaining the temperature of food products. The desired temperature is set using the appropriate buttons on the control panel.
Page 15
3. 5 seconds after the button is last pressed the display will show the current internal temperature. Cooling or heating mode is selected automatically based on the set desired temperature and does not need to be manually activated. Depending on the mode selected, a green or red LED control light will come on at the rear of the device.
6. Cleaning and maintenance WARNING! Before cleaning, disconnect the device from the power supply (unplug!) and leave to cool off. Never clean the device with use of pressurized water jet. Protect the device from the water penetration. o Clean the device regularly. o If the device is used in high ambient tempera- ture or humidity, condensation will form on the device.
Page 17
o Regularly clean the cable plugs with a cloth or plug (dia. Above). Excessive dust can result in fire after the device is activated. o Never use aggressive cleaning substances or solvents. o Never use sharp or hard objects that may damage the device. o If the device is to remain unused for a longer period of time, it should be washed and dried thoroughly.
7. Possible Malfunctions In case of malfunction, disconnect the device from its power source. Before contacting the service or sales agent, verify - based on the table below - whether it is possible to eliminate disruption in operation. Malfunction Cause Solution ...
Electric devices should be used and disposed of properly to prevent the impact on the environment. Disconnect the device from the power supply and remove the power cord from the device. Bartscher GmbH phone: +49 5258 971-0 Franz-Kleine-Str. 28 fax: +49 5258 971-120...
Need help?
Do you have a question about the Mini and is the answer not in the manual?
Questions and answers