Fujitsu Siemens Computers PRIMERGY RX220 Service Supplement Manual page 32

Replacing the internal server power supply cable
Figure 19: Removing the line filter
Ê Press down the two edges of the line filter's stop spring (both at the top (1)
and at the bottom (2)).
I
To permit access to the stop spring on the underside of the line filter
access holes are provided both at the side and on the underside of
the server housing.
Ê Now push the line filter out at the rear through the opening in the housing.
Ê Push the line filter in at the rear through the opening in the housing.
Ê Insert the internal power cable into the cable clamp and close the cable
clamp.
Ê Close the server and connect all power plugs (for a detailed description see
the Options Guide).
32
1
2
Service Supplement
Replacement routines
RX220