Preparation
V
CAUTION!
The server has no cable management in the rack!
Therefore you must unplug all cables connected to the server before
you remove it.
I
How to remove the server from the rack cabinet is described in the
Operating Manual.
Figure 3: Taking off the housing cover
Ê Undo the knurled screw at the back of the device.
Ê Push the server cover backward (2) a few centimeters using the recessed
grips (3).
Ê Lift up the housing cover and remove it.
To close the cover, follow the instructions above in reverse order.
18
Service Supplement
Replacement routines
RX220