Fujitsu Siemens Computers PRIMERGY RX220 Service Supplement Manual page 26

Replacing the control panel board Replacement routines
Figure 11: Removing the control panel board
Ê Unplug the cable on the control panel board.
Ê Undo both screws (see figure).
Ê Remove the control panel board.
Ê Insert the new control panel board.
Ê Fasten the control panel board with the 2 screws.
Ê Plug the cable on the control panel board.
Ê Insert the maintenance cover and fasten it with the screw.
Ê Close the server and connect all power plugs (for a detailed description see
the Options Guide).
26 Service Supplement
RX220