Troubleshooting - ADJ Startec Series User Instructions

Mini Dekker LZR
Channel Value
1
0 - 9
10 - 89
90 - 169
170 - 255
2
0 - 9
10 - 198
199 - 225 COLOR FADE (1 COLOR) SLOW-FAST
226 - 255 COLOR FADE (MIXED) SLOW - FAST
3
0 - 9
10 - 244
245 - 255
4
0 - 9
10 - 49
50 - 89
90 - 129
130 - 169
170 - 209
210 - 249
250 - 255
5
0 - 244
245 - 255
6
0 - 127
128 - 255
7
0 - 127
128 - 255
ADJ Products, LLC - www.adj.com - Mini Dekker LZR Instruction Manual Page 20
7 Channel DMX Mode
Function
SHOW MODE
NO FUNCTION
SHOW 0 (LED, LASER, & STROBE)
SHOW 1 (LED)
SHOW 2 (LASER)
RGBW COLOR MACRO
NO FUNCTION
15 COLOR COMBINATIONS
LED STROBE
STROBE OFF
STROBING SLOW - FAST
SOUND ACTIVE STROBE
LASER COLOR CONTROL
LASER OFF
RED
GREEN
RED & GREEN
RED ON, GREEN FLASH
GREEN ON, RED FLASH
RED & GREEN FLASH
RED & GREEN ALTERNATE FLASH
LASER STROBING
STROBING SLOW - FAST
SOUND ACTIVE STROBE
LED MOTOR CONTROL
SELECT MOTOR POSITION
ROTATION SLOW - FAST
LASER MOTOR CONTROL
LASER PATTERNS
PATTERN CHASE SLOW - FAST
Mini Dekker LZR
Disconnect the unit from its power source. Remove the power cord
from the unit. Once the cord has been removed, you will find that
the fuse holder is located inside the power socket. Insert a flat-head
screw driver into the power socket and gently pry out the fuse holder.
Remove the bad fuse and replace with a new one. The fuse holder also
has a holder for a spare fuse.
Mini Dekker LZR
Trouble Shooting:
Listed below are a few common problems that
you may encounter, with solutions.
No light output from the unit;
1. Be sure the fuse has not blown. The fuse is located on the rear
panel.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may not
activate the unit.
Mini Dekker LZR
Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning the
internal and external optical lenses must be carried out periodically to
optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Use a brush to wipe down the fan grill.
3. Clean the external optics with glass cleaner and a soft cloth every
20 days.
4. Clean the internal optics with glass cleaner and a soft cloth
every 30-60 days.
5. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (I.e. smoke, fog residue, dust, dew). In heavy club use we
recommend cleaning on a monthly basis. Periodic cleaning will en-
sure longevity, and crisp output.
ADJ Products, LLC - www.adj.com - Mini Dekker LZR Instruction Manual Page 21
Fuse Replacement
Trouble Shooting
Cleaning