Table of Contents
Advertisement
Fusion FX Bar 1
Channel
Value
1
1 - 255
2
1 - 255
3
1 - 255
4
0 - 190
191 - 200
201 - 247
248 - 255
5
0 - 9
10 - 120 CLOCKWISE ROTATION FAST - SLOW
121 - 134
135 - 245
COUNTER CLOCKWISE ROTATION
246 - 255
Fusion FX Bar 1
Stand By
Blackout the unit
Function
1. Ø5 LED Strobe
2. Moon flower strobe
Mode
Sound (LED OFF)
American DJ Supply
- www.americandj.com - Fusion FX Bar 1 Instruction Manual Page 11
©
®
DMX Channels & Functions
Function
RED
0% - 100%
GREEN
0% - 100%
BLUE
0% - 100%
DIMMER/STROBE
MASTER DIMMER 0% - 100%
SOUND ACTIVE
STROBING SLOW - FAST
FULL ON
MOON FLOWER ROTATION
NO ROTATION
NO ROTATION
SLOW - FAST
NO ROTATION
UC3 Control
Select show
Show1-2
LED ON
Fusion FX Bar 1
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use a soft cloth to wipe down the outside casing.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
Fusion FX Bar 1
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is "hot"; on some other DMX devices
pin 2 may be 'hot'). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
If problems are not resolved; Contact American DJ® for service.
1-800-322-6337
Fusion FX Bar 1
First unplug the power. The fuse holder is located next to the power
inlets. Using a flat-head screw driver unscrew the fuse holder. Remove
the bad fuse and replace with a new one.
American DJ Supply
- www.americandj.com - Fusion FX Bar 1 Instruction Manual Page 12
©
®
Cleaning
Trouble Shooting
Fuse Replacement
Advertisement
Table of Contents
