Pip Setup Page - Extron electronics Digital Video Scaler Series User Manual

im Vertrieb von
Ethernet Control, cont'd

PIP Setup page

The PIP Setup page (located under the Control tab, figure 4-10), allows easy,
remote access to the picture in picture option of the DVS 304 series.
Figure 4-10 — PIP Setup page
To use this feature, do the following:
1.
2.
3.
4.
5.
Figure 4-11 — PIP "On"
6.
7.
www.camboard.de
DVS 304 • Ethernet Control
4-11
CAMBOARD Electronics
Click the User Control link on the left side of the page. The User Control
page appears (figure 4-8).
Click the button for the input containing the main image source.
Click the PIP Setup link on the left side of the page. The PIP Setup page
appears (figure 4-10).
Use the drop-down menu to set the size of the subordinate (PIP) picture.
Use the drop-down menu to choose the appropriate PIP input
(See chapter 2, Installation and Operation, for information on PIP window
selection). The attributes window for the PIP appears, as shown below.
Once the PIP window is selected, its picture control settings are available
on the PIP Setup page. (figure 4-10).
When PIP is activated, the adjustments under the User Control page are also
applied to the PIP window.
Define the attributes for the PIP.
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de