Please Read The Following Carefully; Parts List - Chicago Electric 95219 Assembly And Operation Instructions Manual

problem
No or low amount of
material being ground off
the workpiece.
Power Switch will not turn
off Stone Grinder.

pLEASE READ THE fOLLOWING CAREfuLLy

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER
AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER.
THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT PARTS THERETO.
part Description
1 Outer flange
2 Inner flange
3 Protection cover flange
4 Splash guard
5 Top cover
6 Bushing
7 O-ring
8 Spindle
9 Needle bearing
10 Bearing platen
11 Hex nut M10
12 Bevel gear
13 Needle bearing 941/8
14 Steel wire ring
15 Gear box
16 Spigot
17 Self tapping screw
18 Plate washer
19 Spring
20 Spindle lock
21 Baffle for shaft
Note: Some parts are listed and shown for illustration purposes only, and are not available
individually as replacement parts.
for technical questions, please call 1-800-444-3353
SKU 95219
1. Increase downward pressure on the Stone Grinder.
2. Check the Abrasive Disc for wear. If necessary, replace the Disc.
Immediately unplug the GFCI Plug from its electrical outlet. Do not use the
Stone Grinder until a qualified service technician has checked out the tool.

pARTS LIST

part
22 Ball bearing
23 Baffle for spring aperture
24 Self tapping screw
25 Armature
26 Needle bearing
27 Bearing bushing
28 Stator
29 Air deflector
30 Self tapping screw
6001-2RS
31 Spring lock washer
32 Self tapping screw
33 Power switch
34 Switch slide rod
35 Self tapping screw
36 Switch bracket
37 Self tapping screw
38 Name plate
39 Shroud
40 Tapping screw
41 Cord holder
42 Cord
possible Solution
Description
627-2Z
part Description
43 Name plate
44 Cord clip
45 Switch
46 Carbon brushes
47 Brush spring
48 Carbon brush holders
49 Housing
50 Plate
51 Spring lock washer 10
52 Bolt
53 Flexible tube
54 Tap 2
55 Side handle
56 Disc nut
57 Abrasive disc
58 Spigot valve
59 Power cord/plug
60 Open end wrench
61 Double open wrench
PAGE 14
REV 07f