Advertisement
INSTALLATION INSTRUCTIONS
UNPACKING
Check for external signs of damage to the
packaging. This may indicate that the con-
signment has suffered damage in transit. Any
damage should be immediately recorded on
the delivery note and reported to your dealer
within 3 days.
Remove all packaging material. Do not use
sharp implements which could damage the
cabinet.
After unpacking, check that the cabinet is in
good condition.
Any damage or shortages
should be immediately reported to the supplier
Check that all restraining tape and protective
polystyrene buffers are removed from inside
the cabinet.
Checklist of items supplied with the cabinet
2 x Coach screws, washers and wall
plugs.
4 x plastic caps to cover access holes in
base of unit..
Levelling toolbar.
Operating manual.
Page 4
INSTALLATION
The dryer is only designed for operation
indoors in a dry environment at a temperature
above freezing point.
NOTE: The appliance should not be located
in a position such that any doorways or safety
exits are impeded with the cabinet door open
and the hanging rails extended.
The lifting straps positioned around the
adjustable feet can be used
lifting the cabinet
into place.
damaging the feet, do not drag the cabinet
across the floor.
The cabinet should stand level on a flat
surface. Adjust using the toolbar through the
access holes in the base panel of the unit if
space around the cabinet is restricted. Ensure
that the top edges of the doors are level.
The cabinet must be fixed to the wall to
prevent it tipping forward when the doors are
opened. Two adjustable brackets are supplied
and these are bolted to the top panel. They
allow for off-setting the cabinet to avoid
obstructions behind e.g. skirting boards,
service pipes, trunking and cables.
WARNING
The cabinet should not be used without being
fixed to the wall.
Installation and Operating Manual
to assist with
To avoid
Hide quick links:
Advertisement
