Phase Research 2000 Series Drive-Thru Timer System 2+2/386 User Manual page 90

PHASE RESEARCH
USER GUIDE
5.b. Press
5.c. Press
will change color.
5.d. Press
5.e. Press
6. Press
7. Press
SHIFTS; DAILY; WEEKLY; MONTHLY; ALT). The averaging period applies
to all Remote Displays. If you select a blank value, no averages will be flashed
between events.
NOTE: Depending on the model of the Remote (one-color, two-color, or percentage),
the data will be shown either in minutes:seconds, seconds only, or percentage.
Time data will be displayed only during the hours the store is open. When
closed, only a colon (two vertical dots, i.e., :) is shown on a minutes:seconds
Display; a seconds and percentage Display is blank.
SECTION 13 - PARAMETERS PROGRAMMING
to move cursor to the right of the percentage.
or to select the desired percentage at which the Display
to move the cursor to [%].
or to select the event to be monitored.
to move the cursor to [FLASH AVG].
or to select the averaging period (HOURLY; DAYPRTS;
13-22