Section 10 - Reset Loop - Phase Research 2000 Series Drive-Thru Timer System 2+2/386 User Manual

PHASE RESEARCH
USER GUIDE
10-1 Reset Loop
This screen lets you manually reset an internal Fast Track 2+2/386 2000 Series Timer Loop
Detector that failed to reset when the last car left. This action should rarely be required.
NOTE: Reset Loop feature should only be used when an L light is on and there is no car on a
particular detection point. Example: L4 is on, the Timer is running, but no cars are in
the drive-thru lane(s). Generally, L1 and L2
be reset from the Fast Track Timer.
From MENU Screen (see "MENU SCREEN" on page 8-1):
1. Press
2. Press
3. Enter your six-digit Access Code. You are now in the Reset Loop screen.

SECTION 10 - RESET LOOP

SECTION 10 - RESET LOOP
THIS FEATURE REQUIRES AN ACCESS CODE FOR ENTRY
to move cursor to [RESET LOOP].
. You are prompted to enter an Access Code.
1 1 : 0 0
R E S E T L O O P
L 1 / A / M E N U
L 2 / A / G R E E T
L 3 / A / W I N 1
L 4 / A / W I N 2
< A R R O W S >
< E N T E R >
< M A I N M E N U >
when used for Menu and Greet
–
A M M O N F E B
F O R :
/
/
/
/
T O M O V E
T O S E L E C T
T O E X I T
2 3
cannot
–
10-1