Phase Research 2000 Series Drive-Thru Timer System 2+2/386 User Manual page 63

PHASE RESEARCH
USER GUIDE
5. Press
the report to either the display or the printer. Selecting the [VIEW] option will
produce a single report that averages all the selected data. Selecting the
[PRINT] selection will produce the same single report, as well as individual
grading reports for each event. The Header for each report section indicates
which time periods are included in the section.
6. Press
display SEARCHING and/or PROCESSING for up to several seconds
before the report is displayed or printed.
7. Press
ing report. This screen shows counts and percentages of cars that meet criteria
for each letter grade.
(If you then need a printed copy of the grading report, press
8. Press
screen.
9. Press
cycling through individual grading reports.
SECTION 12 - MANUAL REPORT SCREENS
to move the cursor to [VIEW] or [PRINT] in order to send
to produce the selected screen or printer report. The Timer will
when viewing a screen report to display the corresponding grad-
to scroll through reports that have too many lines to fit on the
to view grading reports for more than one event by
.)
12-21