Care & Cleaning - Sage Precision Brewer SDC400 Quick Manual

Care &
Cleaning
Always turn the coff ee machine off and remove the
plug from the power outlet before cleaning.
CLEANING THE COFFEE BASKET
AND MESH BASKET FILTER
Remove the coff ee basket. Discard any ground
coff ee and fi lter paper. The coff ee basket and
mesh basket fi lter can be rinsed under running
water. Ensure the fi ne holes of the mesh basket
fi lter are clear. For a deeper clean, wash the coff ee
basket and mesh basket fi lter in warm, soapy water
with a soft bristled brush.
CAUTION
The coff ee basket, mesh basket or paper fi lter
may still be very hot after brewing. Use caution and
allow to cool before removing.
CLEANING THE CARAFE
After each use, empty the carafe. Do not let brewed
coff ee stand overnight as this can cause the carafe
to stain. Rinse the carafe and carafe lid under warm
running water. For a deeper clean, we recommend
regularly washing the carafe in warm, soapy water
using a soft bristled brush. Do not use abrasive
cleansers, pads or cloths which can scratch the
surface. Rinse and dry thoroughly.
CLEANING THE SHOWERHEAD
Simply wipe down the showerhead area
periodically. However, if a more thorough clean
is required, the Showerhead can be removed by
unlocking the Showerhead Ring. Rotate clockwise
then remove the Showerhead for cleaning. Once
complete, reinstall the Showerhead.
CLEANING THE OUTER HOUSING
The outer housing and LCD screen can be
cleaned with a soft, damp cloth. Apply cleaner to
the cloth and not the LCD surface. Polish with a
soft, dry cloth. Cleaning and drying with dry paper
towels or abrasive cloths and cleaners may scratch
the surface.
REPLACING THE WATER FILTER
The provided water fi lter helps prevent scale
build‑up in and on many of the inner functioning
components. Replacing the water fi lter when
indicated on the screen or after 3 months will
reduce the need to descale.
REPLACING THE WATER FILTER
1. Remove old water fi lter and separate the
adapter from the fi lter cartridge. Discard old
cartridge.
2. Soak the new fi lter in cold water for 5 minutes.
3. Attach water fi lter to adapter. Insert the
assembled water fi lter and adapter into the
water tank.
4. Fill the water tank with cold water to the
indicated MAX marking.
5. Navigate the SETTINGS menu and set YES to
the NEW FILTER.
NEW FILTER
EN
13