Related Manuals for Avigilon NVR4-VAL-6TB
Summary of Contents for Avigilon NVR4-VAL-6TB
- Page 1 Installation Guide Avigilon Network Video Recorder NVR4-VAL-6TB NVR4-VAL-12TB NVR4-VAL-16TB NVR4-VAL-24TB...
- Page 2 (2) is responsible for your use of, or reliance on, the information. Avigilon Corporation shall not be responsible for any losses or damages (including consequential damages) caused by reliance on the information presented herein.
-
Page 3: Table Of Contents
Configuring Windows 10 and Activating ACC For More Information Troubleshooting Network Configuration Checking System Health Operating System Recovery By Avigilon Recovery Partition Operating System Recovery By External USB LED Indicators Power Status Indicators Network Link Status Indicators Hard Drive RAID Status Indicators... -
Page 4: Introduction
Introduction The Avigilon Network Video Recorder is preloaded with the Avigilon Control Center software and is configured for maximum performance and reliability. The Network Video Recorder can be easily integrated into any existing Avigilon security system, or act as the base of a new site. -
Page 5: Overview
5. Hard drives Provides access to hot-swappable hard drives. There are LED indicators on each hard drive. The NVR4-VAL-6TB, NVR4-VAL-12TB, and NVR4-VAL-24TB recorders are equipped with four hard drives. The NVR4-VAL-16TB recorder is equipped with three hard drives. 6. Information tag Provides the product service details, MAC addresses and a copy of the Windows license key. -
Page 6: Back View
Back View 1. Serial connector Accepts connections to serial devices. 2. 1 Gigabit Ethernet ports Accepts an Ethernet connection to multiple networks. 3. Power supply Primary power supply. An optional secondary power supply is available (NVR4-VAL-2NDPS-NPC). 4. Video connector Accepts a VGA monitor connection. 5. -
Page 7: Installation
Installation Package Contents Ensure the package contains the following: Avigilon Network Video Recorder Rack sliding rail assembly kit Cable management arm assembly kit Bezel and key Power cable Installing the Rack Rails and Cable Management Arm If the recorder will be kept in a server rack, install the Rack Sliding Rails and the Cable Management Arm provided in the recorder package. -
Page 8: Configuring Windows 10 And Activating Acc
Tool does not automatically start up. For more information about running the local ACC installer, see Operating System Recovery By Avigilon Recovery Partition on the next page. Proceed to activate the license for the Avigilon Control Center software on your Network Video Recorder. Configuring Windows 10 and Activating ACC... -
Page 9: For More Information
If you need to recover the Windows operating system, the Network Video Recorder includes an onboard Avigilon recovery partition that is separate from the operating system partition. The advantage of using the Avigilon recovery partition is that you do not need an internet connection. -
Page 10: Operating System Recovery By External Usb
Configuring Windows 10 and Activating ACC on page 5. 6. Navigate to C:\Avigilon\Control Center Installation Files, and run the ACC installer for the version of ACC software in use at your site. Operating System Recovery By External USB If you need to recover the Windows operating system on the and you have access to the internet, it is recommended that you download the latest Avigilon Recovery Image from http://avigilon.com/recovery... - Page 11 1. Load the Avigilon Recovery Image onto a USB recovery device. 2. Plug the USB recovery device into the workstation. 3. Repeatedly press the F12 key while booting the workstation. 4. On the UEFI Boot menu, select the USB recovery device.
-
Page 12: Led Indicators
LED Indicators The following tables describe what the LEDs on the recorder indicate. Power Status Indicators The power button on the front of the recorder lights up when power is on. Additional information about the power supply is provided by the power status indicator on the back of the recorder. -
Page 13: Hard Drive Raid Status Indicators
The recorder is connected to a network at less than the Link LED is orange maximum port speed. The recorder is working with other parts of the Avigilon Control Connection Status LED is blinking green Center software. Hard Drive RAID Status Indicators Each hard drive has its own set of LED indicators to show its activity and status. - Page 14 LED Indicator Description Blinks green for three seconds, orange The hard drive rebuild has been aborted. for three seconds and off for six seconds Hard Drive RAID Status Indicators...
-
Page 15: Replacing Hard Drives
Server Administrator tool. Contact Technical Support if the rebuilding process does not start. Limited Warranty and Technical Support Avigilon warranty terms for this product are provided at avigilon.com/warranty. Warranty service and technical support can be obtained by contacting Avigilon Technical Support: avigilon.com/contact-us/. Replacing Hard Drives...
Need help?
Do you have a question about the NVR4-VAL-6TB and is the answer not in the manual?
Questions and answers