Remote Control - SHOWTEC Galactic RGB-600 Value Line Manual

Galactic RGB-600 Value line

Remote Control

Button
Auto programs mode
Sound-controlled Mode
Sensitivity Sound-
+ +
controlled mode
Pattern change
/
Preset patterns
Pattern switch
Ordercode: 51325
Function
On / Off
Color settings
Pause
Description
Press the ON/OFF button for 2 seconds to activate the
different modes except the Slave mode.
Press the button to activate Auto program.
Press the button to activate Sound-controlled program, if
the device receives a sound signal, the Music LED indicator
on the front will blink (Blue LED).
Press the buttons to set the sensitivity, from low (1) to high
(9) sensitivity.
Press the buttons to show or change the 32 built-in
patterns.
Press one of the buttons to choose the desired built-in color
of the laser.
Press the buttons to choose the desired built-in pattern
(32).
Press the button to switch between the current pattern
and the last chosen pattern.
Press the button to pause the current show.
20