Table of Contents
Advertisement
Shark Beam One
Remote Control
Fig. 15
Button
Function
Description
Double-press the button (within 5 seconds) to switch IR
ON/OFF
mode ON or OFF.
Reset
Press the button to reset settings.
LEDs ON/OFF
Press the button to switch the LEDs ON/OFF.
Colors
Press the button to switch colors.
Gobos
Press the button to switch gobos.
Frost
Press the button to switch the frost ON/OFF.
Prism
Press the button to switch the prism ON/OFF.
Press the buttons to set the prism rotation. There are 9 steps
Prism Rotate
(0-100%).
Position
Press the button to set a position. There are 8 static positions.
Focus +/-
Press the button to set focus (0-100%).
Press the buttons to set the dimmer brightness. There are 8
Dimmer +/-
steps (0-100%).
Press the button to set the strobe frequency. There are 8
Strobe
steps (from low to high frequency).
Press the button to clear gobo, gobo rotation, color, strobe
Clear settings
and prism settings.
Press the buttons while in Auto, Sound-controlled or Pan/tilt
Function buttons
manual mode.
Press the button to activate Auto mode. Press the 1-8
Auto mode
buttons to select the desired built-in program.
Press the button to activate Sound-controlled mode. Press
Sound-controlled mode
the 1-9 buttons to set sound sensitivity (from low to high
sensitivity).
Press the button to activate manual positioning. Pan/tilt will
Pan/tilt manual
be reset to their center position. Press the 5, 6, 8, 9 buttons to
manually set pan/tilt.
Product code: 45032
26
Advertisement
Table of Contents
