Technical Specifications - Gastroback DESIGN BREW ADVANCED Operating Instructions Manual

• During operation and some minutes thereafter, do not hold your
hands, arms, or any delicate objects under or near the brewing arm,
filter support, or filter basket. Only touch hot parts (brewing arm, filter
cover, filter basket, carafe, warming plate) at the dedicated handles
during operation and shortly thereafter to avoid scalds. Even after ope-
ration these parts may be still hot.
• The warming plate is heated up to 80 - 85°C whenever the appliance
is in operation (ON/OFF button illuminated). Do not place any heat-
sensitive objects on the warming plate. Do not use any coffee contai-
ners with the appliance (e.g. jugs, cups or glasses), that could melt or
burst, when placed on the warming plate.
• Do not place the hot carafe or hot coffee container on surfaces sensi-
tive to moisture and heat.

TECHNICAL SPECIFICATIONS

Model:
Power supply:
Maximum power consumption:
Length of power cord:
Weight:
Dimensions:
Temperature:
Capacity:
Maximum Amount of Coffee Powder:
Certification:
These specifications may change without notice.
52
Art.- No. 42706 » Design Brew Advanced «
220 - 240 V AC, 50 - 60 Hz,
1550 W
approx. 80 cm
approx. 2,8 kg
approx. 240 x 272 x 316 mm (Breite x Tiefe x Höhe)
Brewing water: 96°C
Warming plate: 80 - 85°C
Water tank: 0.25 to 1.25 litres (approx. 2 - 10 cups)
Filter basket: approx. 500 ml (coffee powder + water)
approx. 70 g