Correct Use; Device Type; Type Of Use; For Use In Potentially Explosive Areas - WAGNER PEM-X1 CG Operating Manual

VERSION 05/2019
2

CORRECT USE

2.1

DEVICE TYPE

Powder cup guns for manual coating of grounded work pieces.
2.2

TYPE OF USE

The PEM-X1 CG powder cup gun is designed for the electrostatic coating of work pieces with
organic powders.
WAGNER explicitly prohibits any other use!
The powder cup gun may only be operated in a temperature range from 5–40 °C; 41–104 °F
(FM scope of application 5–45 °C; 41–113 °F).
Electrostatic manual coating systems may only be used in spray areas equipped in accordance
with EN 12981 or under equivalent ventilation conditions.
The device may only be operated under the following conditions:
Use the device only to work with the products recommended by WAGNER.
Do not deactivate safety fixtures.
Use only WAGNER original spare parts and accessories.
The operating personnel must be trained on the basis of this operating manual.
Follow the instructions in the operating manual.
2.3

FOR USE IN POTENTIALLY EXPLOSIVE AREAS

This type A-P electrostatic powder spray gun is suitable for processing industrial powder
lacquer for coating electrically conductive objects and can be used in potentially
explosive areas (zone 22). (See Explosion Protection Identification, Chapter 3.1).
In explosion hazard areas, only use approved explosion-proof electrical devices.
2.4

PROCESSIBLE WORKING MATERIALS

– types of powder that can be charged electrostatically;
– metallic powder.
Note:
Contact your local WAGNER dealer and the lacquer manufacturer if you encounter application
problems.
2.5

MISUSE

Misuse can lead to physical injury and/or property damage!
Special attention must be paid that:
liquid coating products, e.g., solvents or water-based lacquers are not processed;
no food, medicine or cosmetics are processed.
ORDER NUMBER DOC2326960
PEM-X1 CG
9