Replacing The Protective Wedge; Removing The Protective Wedge - WAGNER PEM-X1 CG Operating Manual

VERSION 05/2019
8.6

REPLACING THE PROTECTIVE WEDGE

8.6.1 REMOVING THE PROTECTIVE WEDGE

Note:
A wedge tool is available to prevent the protective wedge from being damaged when
dismantling and inserting.
The wedge tool has a removal side (E) and an attachment side (A). Use the right side for the
corresponding procedure!
You will find the necessary wearing parts and spare parts in Chapter
1 Wedge tool
2 Electrode holder (shown with a cut-away view
to improve comprehension)
3 Protective wedge (when positioned)
Procedure:
1. Guide wedge tool 1 into electrode holder 2 up
to stop.
2. Pull protective wedge 3 out of electrode holder 2
using wedge tool 1.
3. Press protective wedge 3 sideways out of wedge
tool 1 manually (without tool).
ORDER NUMBER DOC2326960
1.
2.
3.
PEM-X1 CG
13 of this operating manual.
1
E
2
3
A
P_01675
43