VERSION 05/2019
8.3
EXCHANGING THE MANUAL GUN
Before exchanging the manual gun, any power residue must be thoroughly removed.
The wearing parts in the manual gun, marked in the spare parts list with " ", must be regularly
checked and replaced as necessary.
1
Procedure:
1. Switch off control unit.
2. Disconnect electrical cable 1 from control unit 2.
3. Disconnect dosing air hose 3, feed air hose 4 and atomizing air hose 5 from spray gun 6.
4. Connect dosing air hose 3, feed air hose 4 and atomizing air hose 5 to new spray gun 6.
5. Connect electrical cable 1 to control unit 2.
6. Switch on the control unit.
7. The spray gun is ready for use again.
ORDER NUMBER DOC2326960
3
4 5
2
P_01732
PEM-X1 CG
6
38