Table of Contents
Advertisement
AHA-3940U/3940UW/3940UWD User's Guide
2
Connect the LED cable to the SCSI activity LED connector on
the host adapter, as shown in Figure 2-15.
LED Cable
Figure 2-15. SCSI LED Connector
If the computer has a two-position LED cable, connect it to
pins 1 and 2 of the LED connector.
Completing Installation
Before you reassemble your computer, be sure that
The devices on each SCSI channel are properly terminated
Each SCSI device on each SCSI channel has a unique SCSI ID
The host adapter is firmly seated and secured in a 5-volt bus
master PCI bus slot
Internal SCSI devices have power plugs attached
Internal SCSI devices are firmly connected to the host adapter
and pin-1 orientation is correct
External SCSI devices are firmly connected to the host adapter
2-16
AHA-3940U/3940UW/3940UWD User's Guide
Stock Number: 511041-00, Rev. B
Print Spec Number: 494569-00
Current Date: 2/14/97
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Pin 1
LED Connector J4
Page: 2-16
ECN Date: 2/17/97
Advertisement
Table of Contents
