Completing Installation; Stock Number: 510400-00, Rev. C Page; Current Date: 11/18/94; Aaaa Aaaa Aaaa Aaaa Aaaa Aaaa Aaaa Aaaa Aaaa Aaaa Aaaa Aaaa Aaaa Aaaa Aaaa Aaaa Aaaa Aaaa Ecn Date - Adaptec AHA-1510A Series User Manual

Completing Installation

Before you reassemble your computer, be sure that
The host adapter is firmly seated and secured in the slot
The devices on each SCSI bus are properly terminated
Each SCSI device on the SCSI bus has a unique SCSI ID
Internal and external SCSI devices are firmly connected to the
host adapter, and pin-1 orientation is correct
Only one floppy controller is enabled (AHA-1522A only)
Many computers have floppy controllers on the motherboard
or on a non-SCSI controller.
Follow these steps to complete installation:
1
Replace and secure the cover of the computer case.
2
Reconnect the power cords to all external SCSI devices and the
computer.
3
Turn the power to all devices.
ON
4
Boot the computer.
See Chapter 5, Troubleshooting, if you encounter any problems during
installation.
A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
A A
AHA-1510A/20A Series User's Guide
A
A A
Stock Number: 510400-00, Rev. C
A A
A A Print Spec Number: 491842-00
A A

Current Date: 11/18/94

AAAA AAAA A AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA
AAAA
Hardware Installation
Page: 3-13
ECN Date: 11/29/94
AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA AAAA
3-13
A
A A
A A
A A
A
A A
A A
AAAA A A A A