Completing Aha-398X Installation - Adaptec AHA-3980 User Manual

AHA-3980/3980W/3985/3985W User's Guide

Completing AHA-398x Installation

To complete installation of the AHA-398x RAID adapter, follow
these steps:
1
Replace and secure the cover of the computer case.
2
Reconnect the power cords to all external SCSI devices and the
computer.
3
Turn the power to all external SCSI devices. (You must turn
ON
on the SCSI devices before you turn on the computer.)
4
Turn the computer.
ON
As the computer boots, look for an onscreen message from the
AHA-398x BIOS (see Figure 5-14). If it does not appear, your system
did not recognize the AHA-398x. Turn
the AHA-398x is properly seated in the PCI slot, and then turn
the computer again. If the AHA-398x BIOS message still does not
appear, your system probably does not support PCI-to-PCI bridges.
For additional information, read the troubleshooting information in
the 3980note.txt file on the AHA-3980/3985 Drivers and RAID Utili-
ties diskette included with the AHA-398x.
Adaptec AHA-3980/3985 BIOS v1.50
(c) 1995 Adaptec, Inc. All Rights Reserved
Press <Ctrl> <A> for SCSISelect (TM) Utility!
AIC-7870/Sequencer Diagnostics Passed
[List of SCSI Devices]
.
.
.
BIOS Installed Successfully!
Figure 5-14. AHA-398x BIOS Message
5-20
AHA-3980/3980W/3985/3985W User's Guide
Stock Number: 510810-00, Rev. D
Print Spec Number: 493479-00
Current Date: 3/1/99
the computer, make sure
OFF
ON
Page: 5-20
ECN Date: 3/19/96