User Guide - Dantherm CDT 30S MK III Service Manual

User guide

Switching on/off The table below shows operation of the on/off function and display texts.
and operating status
Key
Operating the heat- The integrated 1 kW heating element is activated by setting the
ing element switch behind the water container to setting 1. Switch to O to de-
activate.
ON – constant
INT HYG ON – operation controlled by internal hygrostat
INT HYG STOP, if internal hygrostat set point is reached
EXT HYG ON – operation controlled by external hygrostat
EXT HYG STOP, if external hygrostat set point is reached
Switch off
The green LED indicates active dehumidification
Switch behind water container
Display
Continued on next page
11