Setup And User Guide; Product And Function Descriptions - Dantherm CDT 30S MK III Service Manual

Product and function descriptions

Introduction
How it works
Illustration
4

Setup and user guide

This section provides a product description of the CDT 30S/40S MKIII, plus a description
of its functionality.
Air flow through the dehumidifier:
How the air changes as it passes
through the dehumidifier:
The fan draws humid air through a fil-
ter inside the dehumidifier.

The air is cooled, causing the moisture
content to condense into drops of wa-
ter, which are collected in the water
container.

The air is reheated using heat from the
dehumidifier's operation (temperature
increase of approx. +5 °C), and the
option of further heating using the in-
tegrated heating element.
As the air is repeatedly circulated through the dehumidifier, its moisture content is re-
peatedly reduced, resulting in rapid, gentle drying. The dehumidifier can run constantly,
or be controlled by a built-in hygrostat.
Illustration of dehumidifier:
Rear view
Handle
Control panel
Type plate
Air intake with PPI
filter behind grille
Power cord
Data socket
remote monitoring
Air exhaust
Water container
Wheel
Front view
Continued on next page