Dantherm CDT 30S MK III Service Manual page 15

User guide,
cont.
Display texts The table below shows how to operate the operating information functions
Key
Text displays when The machine has a built-in battery to allow reading text displays when not connected to
not connected to the mains. The following texts can be read when not connected to the mains:
mains
and
and
XX°C – shows the current room temperature
Actual RH% - shows the actual relative air humidity value measured
XX kWh - shows total energy consumption. Cannot be reset
xxxxh - shows the total number of operating hours for the machine. Can-
not be reset
Key
Displays total energy consumption in kWh
hold down
press once
Shows total number of operating hours for the dehumidifier
hold down
press once
Feedback
Feedback
Continued on next page
13